5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
146
XI/ON: XNE-GWBR-2ETH-IP
09/2011 MN05002007Z-EN
www.eaton.com
121
(79h)
Param_common_
operation_modes
G/S
BYTE
Bit 0: reserved
Bit 1 - Automatic SWIRE configuration
0: Manual SWIRE configuration:
To store the physical structure of the
SWIRE bus in the XNE-1SWIRE, the CFG
button of the XNE-1SWIRE must be
pressed manually (only functions if the
SW LED is flashing).
1: Automatic SWIRE configuration:
If the physical structure of the SWIRE bus
does
not
match the configuration stored in
the XNE-1SWIRE on power up, the physical
structure is stored automatically in the
XNE-1SWIRE.
Bit 2 - PLC configuration check
0: PLC configuration check is active:
The configuration stored in XNE-1SWIRE is
compared with the SET configuration stored
in the PLC. Only SWIRE slaves in the
SWIRE bus are accepted that have a device
ID completely matching the SET configura-
tion.
1: PLC configuration check is not active:
All slaves are mapped in 4Bit INPUT / 4Bit
OUTPUT without checking the device ID.
Table 61:
Object instance
Attr.
no.
dec.
(hex.)
Attribute name
G
et/
S
et
Type
Description
