5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
XI/ON: XNE-GWBR-2ETH-IP
09/2011 MN05002007Z-EN
www.eaton.com
109
A
Depend on the
selected opera-
ting mode (CNT/
MSRM) and are
not supported in
the other opera-
ting mode. Please
refer to Attribute
No. 113 BASIC
MODE.
114
(72h)
CNT gate
function
A
G/S
ENUM
USINT
The gate function defines the counter’s
reaction to the resetting of the internal
release.
Gate function:
– 0: CNT:
abort count procedure
– 1: CNT:
interrupt count procedure
– 2 to 255: reserved
115
(73h)
Digital input DI
G/S
ENUM
USINT
Defines if the digital input of the module will
be inverted or not.
USINT digital input DI:
– 0: normal
– 1: inverted
– 2 to 255: reserved
116
(74h)
Function DI
A
G/S
ENUM
USINT
Defines the function of the digital input.
Function DI:
– 0: input
– 1: HW gate
– 2: CNT: latch retrigger when edge positive
– 3: CNT: synchronization when edge posi-
tive
– 4 to 255: reserved
117
(75h)
CNT synchroniza-
tion
A
G/S
ENUM
USINT
Defines the kind of synchronization.
Synchronization:
– 0: CNT: single-action
– 1: CNT: periodical
– 2 to 255: reserved
118
(76h)
CNT main count
direction
A
G/S
ENUM
USINT
Defines the main count direction:
– 0: CNT: none
– 1: CNT: up
– 2: CNT: down
– 3 to 255: reserved
119
(77h)
Lower limit
G/S
DINT
Defines the lower limit of the module. The
module reacts according to its parameter-
ization on reaching or undershooting the
lower limit.
120
(78h)
Upper limit
G/S
DINT
Defines the upper limit of the module. The
module reacts according to its parameter-
ization on reaching or overshooting the
upper limit.
121
(79h)
MSRM integra-
tion
A
G/S
USINT
Defines the integration time.
Integration [n * 10 ms]
Table 55:
Object instance
Attr.
no.
dec.
(hex.)
Attribute name
G
et/
S
et
Type
Description