6 Application example: XNE gateway with an Allen Bradley PLC
6.5 Configuration of the network in "RSLogiX 5000"
XI/ON: XNE-GWBR-2ETH-IP
09/2011 MN05002007Z-EN
www.eaton.com
167
If the correct communication path is set, it is possible to download the configuration.
Once the I/O configuration is downloaded and the controller is in "Run" or "Remote Run" mode,
the I/O-data mapping of the XI/ON station is shown in the "Controller Tags":
The controller tags for XI/ON are divided into:
• XNE_1: C - the station’s mapped configuration data
• XNE_1: I - the station’s mapped input data
• XNE_1: O - the station’s mapped output data
Figure 63:
Communication
Path
Figure 64:
Controller Tags
