9 Appendix
9.1 Data image of the technology modules
XI/ON: XNE-GWBR-2ETH-MB
10/2011 MN05002008Z-EN
www.eaton.com
167
Process output data - measurement mode
The data is transferred in 8 byte format:
• Four bytes represent the parameter values for Lower limit or Upper limit, Function of DO1
or Integration time.
• Two control bytes contain the control functions for transferring the parameter values, for
starting/stopping the measurement, for acknowledging errors and for resetting the status
bit.
Structure of the data bytes with "Function of DO1" set
Structure of the data bytes with "Lower limit" or "Upper limit" set
Figure 79:
Structure of the
data bytes with
"Function of
DO1" set
Figure 80:
Structure of the
data bytes with
"Lower limit" or
"Upper limit" set