9 Appendix
9.1 Data image of the technology modules
174
XI/ON: XNE-GWBR-2ETH-MB
10/2011 MN05002008Z-EN
www.eaton.com
6
REG_WR_ACEPT
0
Writing the user data from the control inter-
face to the register addressed with
REG_WR_ADR in the control interface could
not be done.
1
Writing the user data from the control inter-
face to the register addressed with
REG_WR_ADR in the control interface was
successful.
7
REG_RD_ADR
0…127
Address of the input register of which the
content is shown in the user data
(REG_RD_DATA) in the check-back interface if
REG_RD_ABORT = 0.
User data
8
…
11
REG_RD_DATA
0…2
32
-1 Content of the register of which the address is
transferred with the process input data
(REG_RD_ADR) if REG_RD_ABORT = 0.
If not, REG_RD_DATA = 0.
12
…
23
AUX_REGx_RD_DATA
0…2
32
-1 Value, which is read from the register with the
address defined in the parameterization in
ADR_AUX_REGx_RD_DATA.
Table 80:
Process input
data / check-
back interface of
XNE-2CNT-
2PWM
Byte Bit
Value
Meaning