4 Technical Features
4.5 Address setting
XI/ON: XNE-GWBR-2ETH-MB
10/2011 MN05002008Z-EN
www.eaton.com
35
4.5
Address setting
4.5.1
Default-settings for the gateway
The gateway’s default settings are the following:
4.5.2
Function of the DIP-switches
The DIP-switches for address setting, operation mode setting and for the storage of the
station configuration are located under the gateway’s upper label.
IP-address:
192.168.1.254
subnet mask:
255.255.255.000
default-gateway:
192.168.1.001
Note
The gateway can be reset to these default settings by the user at any time.
To reset the gateway, please set the DIP-switches 2
0
to 2
7
to "0" followed by a pow-
er-on reset.
Attention
After every change of the address-mode, a voltage reset must be carried out.
Figure 23:
DIP-switches at
the gateway