Battery Installation & First Time Setup
Note
Battery Warnings
This scale operates on 1 – 3 volt CR2032 lithium battery
(installed). There is a strip under the lithium battery cover
to prevent battery drain in shipping. Please remove the strip
before continuing with these instructions (you may need to
remove the battery compartment cover to avoid breaking
the strip). Also, some models have a static cling label on the
lens to prevent scratching. Please remove before use.
Replace the battery when the scale displays “LO” or readings
become dim or irregular. To replace the battery:
1. Use one 3 volt CR2032 lithium battery.
2. Remove screw (or screws) from the battery compartment
cover on the bottom of the scale and remove the cover.
3. Remove the old battery from the compartment.
4. Place the new battery with the “+” sign up into the
battery compartment.
5. Replace the battery compartment cover and screw(s).
New batteries should last for approximately one year under moderate use (less
than three times daily).
NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. As with all small items, do not
let children handle batteries. If swallowed, seek medical attention immediately.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or
leak. Remove the batteries if the scale will not be used for a long period of
time.
OPERATION
OPERATION
