38
2
）
Delete Waypoints
In the actual operation process, there may be several routes in the middle of a plot
that do not need to be operated. You can delete the routes that do not need to be
operated by deleting the waypoints. The specific operation is: tap to delete the starting
point of the route, enter the ending point of the route to be deleted in the pop-up,
and then tap "Confirm", as shown below:
Figure 26 Delete Waypoints
3
）
Set Help Point
If there is an obstacle between the take-off point and waypoint 1, or between
the take-off point and the returning point, you can set take off / return on the map.
Operation: long press the map, a red triangle will be displayed on the map after
one second, indicating that the help point has been set. Help point needs to be set
in advance before flying to one point and before returning. Upload the flight route
