Part No. 0009777 Rev. D 05/07
DX
810
8X10 DIGITAL MIXER AND SIGNAL PROCESSOR
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 |
Page 3 of 5
DX-810-PC SOFTwARE
The DX810 real-time DX-810-PC software
application provides access to all of the DX810’s
controls. The user interface employs a full-matrix
mixer, making settings and operation clear and
intuitive. The input, output, crosspoint, and group
faders are visible at the same time, allowing
immediate access to all level controls. Indicators
for Active Logic Inputs and Mute Groups are
always visible, as are the input and output
signal meters. Equalizer, compressor, gate, delay,
crossover, and setup screen views are recalled
from direct-select buttons.
The main interface screen offers 8 input faders, 10 output
faders, 80 crosspoint faders, and 32 group faders
The input EQ view offers three filters for each input, with
rotary gain and frequency controls for the High and Low
Shelving filters, and gain, frequency, and bandwidth controls
for the Bandpass filter
The Graphic EQ view offers 31 bands of control on ISO-
centered frequencies for each of the ten outputs
The Parametric EQ view includes five bands of control for each
output, as well as a display window that graphically represents
the parameter settings
A full-featured compressor is provided for each input and
output, and a full-featured gate is provided for each input
