Acoustic Performance Partnership
Eastern Acoustic Works
SB625P
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com
AC
OU
ST
ICA
L P
ERFOR
MANCE P
ART
NE
RSH
IP
TECHNICAL SPECIFICATIONS
SB625P
DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING
SERVICE ITEMS
Sub: Complete Cone Driver
EAW Part No.
804052
Filter/Crossover Network: Complete Assembly
EAW Part No.
201203
ARCHITECTURAL SPECIFICATIONS
The sub bass loudspeaker systems shall incorporate 2x 15-in
LF transducers mounted in separate vented subenclosures
tuned for optimum low frequency response.
System frequency response shall vary no more than
±
3 dB
from 33 Hz to 200 Hz measured on axis with appropriate
signal processing. The loudspeaker shall produce a Sound
Pressure Level (SPL) of 98 dB SPL on axis at 1 meter with a
power input of 1 Watt, and shall be capable of producing a
peak output of 137 SPL on axis at 1 meter. The loudspeaker
shall handle 2000 Watts of amplifier power (AES Standard)
and shall have a nominal impedance of 4 (2x 8) Ohms.
The loudspeaker enclosure shall be rectangular in shape. It
shall be constructed of 15mm thickness void-free cross-grain-
laminated Baltic birch plywood and shall employ extensive
internal bracing. It shall be finished in black catalyzed poly-
urethane. Input connectors shall be 2-terminal barrier strip.
A total of sixteen 3/8"-16 threaded mounting/suspension
points (4 each top, bottom, sides) shall be provided. The
front of the loudspeaker shall be covered with a vinyl coated
perforated steel grill.
The sub bass loudspeaker shall be the EAW model SB625P.
3.50
11.38
SIDES
BACK
6.00
19.38
3.25
TOP
BOTTOM
(1.88)
19.38
1.88
19.75
16
FRONT
29.25
33.25
(2)
3/8-16 THREADED HOLE (TO BE DETERMINED)
CABINET TO BE SYMMETRICAL ABOUT ITS CENTERLINE DESIGNATIONS
CENTER OF BALANCE.
SB625P
510148
EXP 3/9/97 SHB
ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
C
L
C
L
