SPECIFICATIONS SM12
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
SM12/2 pp
October 2001
Printed in USA
The two-way full range loudspeaker system shall incorporate a
12-in LF transducer and a 3-in voice coil/1.4-in exit neodymium
compression driver. Powering mode is bi-amplified.
The LF driver shall be mounted in a vented enclosure tuned for
optimum low frequency response. The HF driver shall be
loaded on a constant directivity horn with a nominal coverage
pattern of 40° (h) x 60° (v).
System frequency response shall vary no more than ±3 dB from
60 Hz to 17 kHz measured on axis. The LF shall produce a
Sound Pressure Level (SPL) of 98 dB SPL on axis at 1 meter
with a power input of 1 Watt, and the HF shall be capable of
producing an output of 110 SPL on axis at 1 meter with a
power input of 1 Watt. The LF shall handle 700 Watts of ampli-
fier power (continuous) and the HF shall handle 200 Watts of
amplifier power. Both shall have a nominal impedance of 8
Ohms.
The loudspeaker enclosure shall be irregularly triangular in
shape with its baffle angled up 53°. It shall be constructed of
multi-ply, void-free cross-grain-laminated Baltic birch ply-
wood and shall employ extensive internal bracing. It shall be
finished in wear-resistant textured black paint. Input connec-
tors shall be 4x Neutrik NL4 Speakon (2 per side). The front
of the loudspeaker shall be covered with a powder coated per-
forated steel grille backed with open cell foam to protect
against dust.
The two-way full range loudspeaker shall be the EAW model
SM12.
FRONT
GRILLE PARTIALLY SHOWN
26.04
BACK
12.75
SIDES
3.00
6.96
15.89
4.00
.73
4.00
2X INPUT
R 17.93
2X HANDLE
.59
8.61
.59
509069 (A)
8/31/99
Manufacturing tolerances are +/- 0.13 and +/- 1°
