Charging the Helicopter:
1. Turn the helicopter power OFF.
2. Insert the charging plug into the socket
on the helicopter. Then plug the charger
into the wall.
3. The LED will be off when charging.
When the product is fully charged, the
LED will turn on. Remove the plug
from the helicopter.
FLYING YOUR HELICOPTER
GETTING STARTED
•
Switch the helicopter’s ON/OFF switch to the ON position. The power
light will turn on.
•
Place the helicopter on the ground with the tail pointed toward you and
the nose facing away from you.
•
Make sure your surroundings are clear of obstacles before fl ying.
•
Do not fl y if the helicopter has become damaged in any way.
• NEVER
fl y the helicopter around another person or animal.
OPERATING YOUR HELICOPTER
LEFT joystick
- Slowly press UP on the Left joystick to increase the speed of
the rotor blades to cause the helicopter to ascend into the air. Slowly release
the Left joystick to cause the helicopter to descend.
RIGHT joystick
- Move the Right joystick to the left or right to turn the
helicopter left or right.
4
Requires approximately 120 minutes
charge for a full 8 minute fl ight.
DO NOT OVERCHARGE
XC9970IS01EXCRA.indd 4
XC9970IS01EXCRA.indd 4
7/28/11 2:35 PM
7/28/11 2:35 PM
