12
S 02
1
Reclosing
when turning off
(Default 0)
Make a complete opening and closing cycle, only in case the
tension has been broken, when the gate was open.
S 04
1
Passage control
(Default 0)
When the photo-beams realize the passage, if
S19
has value 0,
the pause time is 2sec.
S 19 1
Riverse at
the passage check
(Default 1)
Put
S04 at 1
. When the function is activated and the gate is
opening, the control unit reverse the direction of the motors
and close.
S 07 1
Fixed Light
(Default 0)
The light is lit on when the gate is open.
S 09 1
Activation of soft-start
(Default 0)
The motors have minimum values until the settled values.
S 10 1
ONE mOTOR function
(Default 0)
If you put at 1 the S10, the control unit can synchronise the move
of the motors. The working time memorization will be done only
for motor no.1
4
Function and adjustment
Set up
Function
Description
S 01 1
Fast reverse
(Standard value)
By each control it riverse:
open-close
2
Collective use
When opening and pause time it doesn’t accept any control, it
re-close automatically.
3
Step-by-step function
Each control it follows each:
open-stop-close-stop-open
No automatic reclosing
4
Step-by-step
with automatic re-closing
after pause time
By each control it follows
open-stop-close-stop-open..
It reclu
-
ses automatically after the pause time.
5
Industrial use
The
PARTIAL OPENING
control has a closing function, too while
START
follow the logic of dip1 and dip 2
6
man present function
The
START
control opens, the
PARTIAL OPENING
closed. The
motors stop after the button will be released.
4.1 Function
Check the right function of the motors and the accessories as shown in the par.
4.2
and then, if you don’t know the working
time of the motors, program the speed (see
Par. 4.4
), obstacle detection (see
Par. 4.5
) and activation/deactivation of the
inputs.
Summary of Contents for START S10
