background image

5

Radio signal for Great Britain (MSF)

Display »LON« starts to flash at 1 Hz ,
»antenna« at 0.5 Hz.

To select the appropriate city, press (–) 

or (+) 

(refer to paragraph »Setting the

respective local time«).

Press the MODE button 

once. If no

button is pressed for more than 15
seconds then the respective city (nearest
city) is confirmed. 

»--:--« The display in the time panel is
stable The »Antenna« display continues
to flash at 0.5 Hz. 
The second panel starts to count forward
in seconds, as soon as the exact MSF
signal is received.

As soon as the MSF Signal is received
and decoded the real-time clock sets
itself and the »Antenna« 

display is

stable. The appliance immediately swit-
ches into automatic mode.

The automatic mode starts by pressing
the MODE button 

 

once. 

The date and time are set to 1. January
2004, 12:00 o'clock.

As long as no button is pressed, or if no
valid MSF signal has been received within
15 minutes  then the display shows»--:--
the »Antenna« display is deleted ( invisi-
ble, antenna-symbol is not displayed).

Safety 

Important safety instructions

The following basic safety instructions must
be taken into consideration in all cases when
using electrical appliances:
Please read the following safety instructions
and instructions for correct use of the appli-
ance carefully. Before reading the instruc-
tions, flip open the page with the illustrations
and then acquaint yourself with all the func-
tions of the appliance. 

Store these instructions carefully and pass
them on to others as required.

To avoid life-threatening electric shocks:

'Warning!: Electric shock. Do not ope-

rate the appliance if the power plug,
power cord or the appliance itself is
damaged.

If the appliance has been dropped then
have it checked by a qualified electrician
before turning it back on.

'Warning!: Electric shock. There are

dangerous live voltages inside the appli-
ance. Never open the housing or insert
objects through the ventilation slits.

Make sure that no liquid enters inside the
appliance. In emergencies, immediately
pull the power plug.

Also pull the power plug from the power
socket, if there are disturbances during
operation and before cleaning the appli-
ance. 

Do not make any changes or repairs to
the appliance yourself. The power cord
should also not be replaced. Repairs to
the appliance or to the power cord
should only be carried out by a specialist
workshop or in the service centre. 

To avoid injury hazards:

'Warning!: Incorrect repairs can result

in significant dangersfor the user.

Children often underestimate the dangers
when handling electric appliances. You
should therefore never allow children to
be unsupervised in the vicinity of electri-
cal appliances.

Do not operate the appliance unsupervised!

The appliance must both be used in
damp rooms (e.g. bathrooms) or in rooms
with a lot of dust.

IB_KH2292_content_UK.qxd  03.03.2005  14:26 Uhr  Seite 5

Summary of Contents for KH 2294









Reviews: