EQUIPMENT DESCRIPTION
Wrist Action Shaker: Electronic regulation between 100 and 600 oscillations
per minute. Oscillation amplitude is 9mm. Easily detachable arms equipped
with 8 clamps for attaching and processing up to 8 samples at one time.
TECHNICAL FEATURES
Voltage supply 115V, 50/60 Hz
Height
18 in
Length
14 in
Width
36 in
Maximum Capacity
4 kg (8.8 lbs)
Oscillations per minute
100-600 +/-2
Power Consumption
0.7 Amps
INSTALLATION
1) Place the apparatus on a flat, horizontal, level surface with enough
stability to resist its own vibrations.
2) Fit the arms with clamps to the shaker side shaft so that the screws
tighten against the flat surface of the shaft.
CAUTION!!!
IMPORTANT FOR YOUR SAFTEY
Be sure that the voltage supply is the same as the one indicated on the serial
tag.
Do not shake products capable of making an explosive mixture.
Do not use the apparatus if it is not grounded properly.
