EBF 20
EN
7
www.eberg.eu
4. CLEANING AND MAINTENANCE
5. UTILIZATION
This device requires very little maintenance and does not contain spare parts that can be replaced
by the user. Do not attempt to repair the device yourself. If servicing is necessary, contact the
service center.
The fan is permanently lubricated and will not require additional lubrication throughout its life.
CLEANING:
Turn off the fan and remove the plug from the wall socket before cleaning. Wipe off
excess dust with a lint-free cloth. To ensure adequate air circulation to the engine, the ventilation
holes on the back of the motor housing should be free of dust. You can use a vacuum cleaner to
clean these holes. Do not immerse the fan in water or any other liquid.
STORAGE:
Before packing for storage, make sure that the fan is removed and cleaned. Keep the
original packaging for storage of the fan. Always keep the fan in a dry place. Never store in the
package when the device is connected to the power supply. Never wrap the cord tightly around
the fan and do not strain it in the place where the power cord enters the fan housing, as this may
cause it to fray and crack.
When the device reaches the end of its service life, it must not be disposed of as
household refuse. To protect our environment and maximally process the raw
materials used, the device must be delivered to a proper waste disposal plant or
organization that provides a similar service. Separate disposal of electrical waste
prevents the potential negative effects on the environment and human health
resulting from inappropriate disposal, and also allows the recovery of materials
that are recovered and recycled to achieve significant energy and resource savings.
The obligation of separate disposal is marked with the crossed-out wheeled bin
symbol on the product. Illegal disposal of the product by the user will result in
administrative sanctions in accordance with applicable regulations.
