EDO
EN
13
www.eberg.eu
The design of the device allows the use of aromatherapy by adding essential oils to a special tray for
aromatic oils located in the base of the humidifier.
To use the aromatherapy function, turn off the humidifier, disconnect it from the power source, and lift the
water tank from the base of the device. Perform this operation with utmost care not to spill the water from
the tank. Put the drops of fragrance oil on the tray, then place the tank on the base, connect the device to
the power supply and start the humidifier.
IV. REFILLING THE WATER
V. AROMATHERAPY
Always unplug the machine from the power supply before removing the water tank. Do not touch the
water in the base. Do not pour water into the steam outlet of the machine.
Attention!
Do not put any fragrance oils into the water tank. Fragrance oils can only be added to a special
tray located in the base of the humidifier. Fragrance oils added directly to the water tank may
weaken the tank material and seals. This can lead to leakage and water leakage from the tank. The
manufacturer is not responsible for damage to the tank and seals as a result of using fragrance oils
directly in the water tank.
1.
Turn off the device and disconnect it from
the power supply.
2.
Remove the water tank cover.
3.
Make sure that there are no objects or
debris in the water tank.
4.
If any contamination is noticed, clean the
tank.
5.
Fill the tank with clean, cold water.
6.
If the tank has been cleaned and for this
purpose it has been removed from the
base and the steam outlet column has
been removed, carefully reinstall the steam
outlet column, then place the water tank
on the base.
7.
Insert the plug into the socket and switch
on the device.