HUX 40
EN
7
www.eberg.eu
3. Attach the motor with switch compartment onto the upper pipe. Ensure the switch
compartment is pushed fully onto the upper pipe and secured with the screw provided.
4. Loosen cover mounting nut from the motor housing.
5. Position rear cover firmly to motor housing and then fasten by turning cover mounting nut
clockwise tightly.
6. Push the rotor along motor shaft, fasten it firmly with screw by turning counter clockwise.
7. Hang the front cover to rear cover with the position fixer provided at the rim of cover, and then
fix together with clips provided.
