54
•
Trip travelling time (
h:m:s Trp)
Adds the travelling time taken since the bicycle
has been in motion. Stopping at traffic lights, for
example, is not calculated as travelling time.
•
Operating distance
Details concerning operating distance are
continuously calculated allowing for the
operating level and the individual mode of
operation. Jumps in the display are possible
by changing the assistance level, changes in
geography or also through changes in your
mode of operation. As a general rule, the display
adjusts itself to the bike’s settings and your
mode of operation. This calculation is performed
for all modes of operation separately.
Immediately after scrolling to the Trip Display in
the Main Menu Display, there is a two-second
option of deleting the stored trip data using the
“CLEAR” button.
Example: Resetting from the Trip Top Speed
display:
reset by pressing the “CLEAR” button
Second level
You can enter the second level by pressing and
holding down the “MENU” button for longer. The
following functions available here are:
•
Stopwatch (CHR)
•
SETUP
•
INFO
