60
You can adjust the brightness of the background
lighting to suit your personal preferences. Please
follow the instructions for this. The editing mode
for brightness of the background lighting can
be entered from the SETUP•IGHT display, by
pressing the “ENTER” button.
The current level of display brightness flashes.
The value can be altered to between 10 and 100
% using the arrow buttons.
Please note that 100 % appears rather dazzling
at night.
The editing mode is cancelled by pressing the
“EXIT” button. If an alteration has taken place,
then SAVE / CANC appears again (procedure as
described in the preceding examples).
T-OUT (Timeout Menu)
The editing mode of the Timeout-Time Menu
can be entered from the SETUP•-OUT display
by pressing the “ENTER” button. The Timeout-
Time can be altered using the arrow buttons
from 10 to 99 seconds. This setting gives the
time available for editing in seconds (setting 10
to 99 seconds). If processing of a menu section
is suspended, the display returns to the main
menu according to this setting. For example, if
the setting is “20”, it will automatically return to
the main menu after 20 seconds.
The input process can be accelerated by holding
down the arrow buttons (Repeat function). If an
alteration has taken place, then SAVE / CANC
appears again (procedure as described in the
preceding examples).
