67
ED-3 SP Pedelec with Lithium-ion battery
GB
If such transportation is required, do not forget
to take the battery out of the Pedelec in advance
and upon arrival, dry the wet bicycle sufficiently
before re-inserting the battery.
Operating instructions
•
Before using the Pedelec, it is recommended
that you protect the chrome parts and
the frame with any commercial cycle care
product.
•
Clean the cycle regularly from dust and dirt
with a sponge or soft cloth. Use a normal
cycle cleaning product and a protective
agent .
•
Never use high-pressure cleaners to clean
hubs and pedal bearing. This will damage
the components.
•
Ensure that the tyres and brake rubber do
not come in contact with oil.
Preserving in Winter
The Pedelec should be carefully preserved in
case of long-term storage in the winter months.
Ensure that the Pedelec is parked in a room
with constant temperature. Large temperature
fluctuations as well as humidity have a
negative effect on all Chromium and light metal
components. To store it away for winter, check
the Pedelec on the whole for damages to avoid
any workshop repairs in spring. Unburden the
tyres by hanging up the Pedelec.
If you do not intend using the Pedelec for longer
periods, pull out the fuse of the battery and store
it in a cool and dry room.
The recommended storage temperature for
the battery is 15°C.
Disassembly of the rear wheel
WARNING:
Please remove the drive battery from the
Pedelec prior to performing any work on
the rear wheel’s wiring!
If tyre damage occurs and it is necessary
to remove the front wheel then follow the
instructions given below:
Disassembly
Remove the drive battery from your Pedelec.
Cut the two cable ties which secure the motor
connector on the chain stay.
Den Stecker öffnen sie durch einfaches
auseinanderziehen.
Beide Achsmuttern nun lösen.
Das Hinterrad lässt sich jetzt, wie bei einem
ganz normalen Fahrrad entnehmen und Reifen-,
Schlauch- oder Speichenschäden beheben.
