68
Assembly
Insert the rear wheel and re-position the
torque-support discs on the hub axis within the
dropout.
Replace the axle nuts. Align the front wheel and
tighten the axle nuts firmly.
Connect the plug. To facilitate alignment arrows
are located on both plug parts which must be
facing one another when assembling.
Secure the plugs with the cable ties to the fork
again.
The battery should only now be replaced in
the ED-3EX in order to avoid damage to the
electronic system.
Returning the Battery/
Recycling
Please do not put the battery pack into the
household waste.
Containers for collecting batteries can be found
wherever batteries are sold or at local collection
points. This ensures batteries are disposed of
correctly. You can also return the battery to your
specialist dealer.
In order to send battery packs, please consult
your dealer as lithium-ion batteries may not be
sent by parcel carriage without being labelled.
Please also note the instructions on the bottom
of the battery:
