5.5 Cushion installation
It is important to position the seat at the correct height for better pedaling, safety and
overall ride comfort. The length of the rider's legs is used to determine the seat position.
Your hips should be level as you pedal, and your legs should be almost fully extended
at the bottom of the pedal, but not hyperextended. To determine the correct seat for him,
sit on the e-bike with one pedal at its lowest point and put your foot on the ball on the
pedal. Your legs should be almost fully extended (not locked out) with a slight bend at
the knees.
Adjust the seat and seat head
so that they are parallel to the
top tube.
Close the quick release lever
with your palm or fingers.
Open the quick-release
lever fully and swing it out
to open the quick-release
lever.
Move the seat up and down
by sliding the seatpost in or
out of the seat tube. Do not
raise the seatpost past the
minimum
insertion
mark
etched on the seatpost tube!
8
