Long press
or Press Throttle to exit the cruise mode when the vehicle is in
cruise mode.
Long press
to turn on/off backlight
4. Turn on/off the LCD Panel
When the display panel is operating, long press
and it will be turn off, oth-
erwise it will be turned on.
5. Switch Displayed Readings in Multi-Functions Section
Short press
to switch readings shown in the multi-functions section.
6. Set Parameters
Long press
+
to enter the setting interface.
Customizable parameters include:
Wheel Diameter (unit: inch);
Magnet Steel Number;
Backlight Brightness;
Low Voltage Threshold (refer to setting: P01-P14)
In the setting interface, short press
or
to add/minus
value to the parameter, which will blink after modified. After selecting the parameter that
needs to be set,
I. a. Long press
to save the current value, and the parameter will stop blinking;
b. Short press
to switch to the next parameter and the previously set value will
be saved at the same time.
II. Press
+
to exit the setting and save the parameters.
Without this operation, the system will automatically exit and save the modified
parameters after 10 seconds.
Note: Due to product upgrade, the product you purchased may be slightly
different from the descriptions in this user manual, and this won’t affect
normal usage.
6
