RANGE EXTENDER
ORBEA | 17
USER’S MANUAL
16 | ORBEA
ASSEMBLING
THE RANGE EXTENDER
OK
GAIN
The Range Extender must be installed using the specific Ebikemotion bottle
holder included with the unit.
The Range Extender must always be installed on the seat tube of the bicy-
cle frame. The unit is not compatible with mounting on the diagonal tube.
For installation, separate the specific Ebikemotion bottle holder from the
unit. Then install the bottle holder on the seat tube of the bicycle using the
M5x16 (2) screws and washers included (1). The washers must be placed
between the head of each screw and the bottle holder.
Tighten the M5x16 screws to a tightening torque of 5Nm. It is recommend-
able to check this tightening torque on a regular basis before using the
Range Extender on the bicycle.
The Range Extender is not compatible with eMX24 models and Optima.
It is not possible to mount or connect two Range Extender units on the
same system/bicycle.
02 01
4
5 Nm
Summary of Contents for Range extender
Page 1: ...USER S MANUAL RANGE EXTENDER ES EN FR DE IT...
Page 27: ......