Part Number
Operating Instructions
Item no. LS-128.
Revision 002
Release 17/02/2016
Page 3 of 8
ebm-papst A&NZ Pty Ltd
10 Oxford Road · Laverton North VIC 3026 · Phone +61 (03) 9360 6400 · Fax +61 (03) 9360 6464
ABN 33 115 927 556
NSW Phone +61 (02) 9827 6400 · NSW Fax +61 (02) 9827 6464 · NZ Phone +64 (09) 525 0245 · NZ Fax +64 (09) 525 0246
sales@ebmpapst.com.au · www.ebmpapst.com.au
EBM ALPHA
2.
PROPER USE
The device is exclusively designed as a built-in device for
moving water according to its technical data.
Any other or secondary use is deemed improper and constitutes
a misuse of the device.
Customer equipment must be capable of withstanding the
mechanical and thermal streses that can arise from this product.
This applies for the entire service life of the equipment in which
this product is installed.
Proper use also includes:
Using the device in accordance with the permitted
ambient temperature, see chapter 3.5 Transport and
storage conditions and chapter 3.2 Nominal data.
Operating the device with all protective features in
place.
Minding the operating instructions.
Improper use
Using the device in the following ways is particularly prohibited
and may cause hazards:
Operating the device with an imbalance, e.g. caused
by dirt deposits or icing.
Moving water that contains abrasive particles.
Moving highly corrosive water, e.g. salt water
Operating the device close to flammable materials or
components.
Operating the device in an explosive atmosphere.
Using the device as a safety component or for taking
on safety-related functions.
Operation with completely or partially disassembled
or modified protective features.
Opening the terminal box during operation.
In addition, all application options that are not listed
under proper use.
