User Manual VW 1350 HB
– The Manual Operated VMS-Trailer
CAUTION!
Do not park this machine on a ramp with a gradient of
10% or more. When you park the machine on a soft surface,
please use the extendible stamps for a better stability of the
machine.
3. Please use the lid on the top frame. Figure 9 explains how to
rotate the upper-frame. Please make sure that the upper-frame is
in the requested position and lock the upper-frame with the two
red locking pins. By rotating the upper-
frame, it’s possible to
check if the upper frame is properly locked.
4. T
urn the main switch to ‘’ON’’ in the main box in the front
compartment (Figure 2), the display is now in stand-by mode.
5. T
he ‘’UP’’ and ‘’DOWN’’ controller is mounted on the underside
of the of upper-frame. See F
igure 5. Please press the ‘’ON’’
button until the display cannot pushed higher. The display will
automatically turn on with the selected animation.
6. For another programming of the display, check section 4.3;
7. When the machine must turn back in the transport mode (Figure
8), press the button ‘’DOWN’’ until the display stops turning down.
The display automatically turns off when the machine is in its
transport mode.
- IMPORTANT -
Make sure that the turning mechanism is locked with the
red locking pins.
- IMPORTANT -
Do not forget to lock the compartment doors to prevent
vandalism.
Figuur 9
