User Manual VW 1350 HB
– The Manual Operated VMS-Trailer
4.4 CHARGING
The charger is a component that requires no or low maintenance. Please
install this charger in a clean, dry area. Please be aware that the
‘’cooling’’ vents of the charger are not blocked. If the charger doesn’t
work anymore, please check if the switch-plug is working. If the charger
is still broken, please contact EBO van Weel B.V. for more information.
4.4.1 CHARGER
The machine is equipped with the following charger:
The batteries should be charged in a proper way, please find the right
steps below:
1. Check the fluid level before charging the batteries. This type of
battery is not maintenance free. If necessary, add extra fluid until
the required level is reached. (see section 6.2.3. maintenance)
2. Connect the charger through a charging cable to the mains.
3.
The three LED’s indicate the different charging modes. The
rightmost LED will light up green soon as the charger cradle is
properly connected to the power supply and the remote control is
properly putted into the charger cradle.
4. When the charger indicator LED
doesn’t light up, the following
points may be affective:
▪
One or more batteries are defect;
▪
Fuse is melted;
▪
Charger is defect;
▪
Plug is not connected properly
Type battery charger
Indicator
Xenteq
– TBC 600
Green LED = Loaded
Orange LED = Charging
Red LED = Boost
Chart 4
