27-11-2014 30 ebode IPV4NVR
How to configure the IP Address, Subnet Mask, Gateway, Primary DNS Server,
Secondary DNS Server, please refer to “ Appendix II Common operations > 2. Configure
the IP Parameters”.
DDNS:
Check the DDNS checkbox, you can configure the DDNS information of the NVR.
The NVR has embedded a unique DDNS domain name when producing, and you can
directly use the domain name, you can also use the third party domain name.
Note: Here take a6747.myipcamera.org for example.
Enable DDNS
：
Check the DDNS checkbox to enable this feature.
Click Save button to take effect. Then you can use http:// Domain name + HTTP Port to
access the NVR via internet.
Take hostname a6747.myipcamera.org and HTTP Port. 88 for example, the accessing
link of the camera via internet would be http://a6747.myipcamera.org:88
Third Party DDNS
：
You can also use third part DDNS, such as www.no-ip.com, www.
3322.com. If you set the third party DDNS, refer to the “Appendix II Common
operations > 1.Third Party Domain Name Settings”.
Email:
Check the EMail checkbox, you can configure the E-mail information of the NVR.
The system can be configured to send an email to the designated users if an alarm or
motion event is detected etc.
Before configuring the Email settings, the NVR must be connected to a local area
network (LAN) that maintains an SMTP mail server.
