27-11-2014 49 ebode IPV4NVR
Step3: Click Save button to take effect.
Step4: Click Test to see if Mail has been successfully configured.
If the test success, you can see the success information, at the same time the receivers
will receive a test mail.
FTP Settings
The system can be configured to send an picture to the FTP server if an alarm or motion
event is detected etc..
tep1: Choose ”
(Parameter Configuration) > Local settings > F TP Settings”. The FTP
Settings page is displayed.
Step2: Configure the FTP parameter.
Step3: Click Save button to take effect.
Step4: Click Test to see if FTP has been successfully configured.
If the test success, you can see the success information.
Parameter
Description
FTP Address
If your FTP server is located on the LAN, you
can
set
FTP
address
as
address.(eg.ftp://192.168.1.103/dir).
If your FTP server is located on the WAN, you
can
set
FTP
address
as
name/dir.(eg.ftp://test.no-ip.org/dir).
FTP Port
Default port is 21. If changed, external FTP client
program must change the server connection port
accordingly.
FTP Mode
Here supports two modes: PORT and PASV.
FTP Username
The user account of FTP server.
FTP Password
The user password of FTP server.
