background image

 

27-11-2014                                                                    66                                                              ebode IPV4NVR 

   

7.5 Playback 

Choose “  (Playback)”, you can play the recording file of the NVR. 
  

 

 

1: Select a date with recording in calendar. 

2:  Select  the  Record  Type,  and  check  the  checkbox  from  the  Channel01,  Channel02, 

Channel03 and Channel04. 

3: Click Search button to search the matched recorded files. If there are search results, 

then they will be shown in the time bar area. 

4: Manage the recording. 

 

Icon 

Description 

 

Start 

 

Stop 

 

Fast  backward.  The  fast  backward  speed  can  be  4,  8,  16   or  32  times  of  the 
normal  playing  speed.  The  multiple  of  normal  playing  speed  is  displayed  in 
the  upper right corner  of the playback  page.  For example, “<<  X4”  indicates 
the current fast backward speed is four times of the normal speed.  

 

Fast  forward.  The  fast  forward  speed  can  be  twice,  4,  8,  16  or  32  times  of 
the  normal  playing  speed.  The  multiple  of  normal  playing  speed  is  displayed 
in  the  upper  right  corner  of  the  playback  page.  For  example,  “>>  X2” 
indicates the current playing speed is twice of the normal speed.  

 

Slow  progress.  The  slow  progress  speed  can  be  1/2,  1/4,  1/8,  1/16  or  1/32 
times  of  the  normal  playing  speed.  The  multiple  of  normal  playing  speed  is 
displayed  in  the  upper  right  corner  of  the  playback  page.  For  example,  “>> 
X1/2” indicates the current playing speed is 1/2 times of the normal speed. 

 

Download. Downloaded files are stored to the local PC. 

 

Select  the  channel,  click  this  button,  and  you  can  take  a  picture  of  a 
corresponding  channel  to  the  local  computer.  You  can  set  the  storage  path, 
refer to the "Web > Parameter configuration > Settings > Storage Location".   

 

Full screen. Make the playing video maximized.  Press ESC to exit full screen. 

Summary of Contents for IPV4NVR

















































































Reviews: