5
Quickstart
1
QUICKSTART
Quickstart describes the entire life cycle of the device. Keep these
instructions in a location which is easily accessible to every user and
make these instructions available to every new owner of the device.
Important Safety Information!
Read Quickstart carefully and thoroughly. Study in particular the
chapters entitled „Intended use“ and „Basic safety instructions“.
▶
Quickstart must be read and understood.
Quickstart explains, for example, how to install and start-up the device.
A detailed description of the device can be found in the operating
instructions for positioner Type EP 501 / EP 501 C.
The operating instructions can be found on the enclosed CD
and on the Internet at:
www.ebro-armaturen.com
1.1
Definition of term “device”
The term “device” used in these instructions always stands for the
Type EP 501 / EP 501 C / EP 501 L.
2
SYMBOLS
The following symbols are used in these instructions.
DANGER!
Warns of an immediate danger!
▶
Failure to observe the warning may result in a fatal or serious
injury.
WARNING!
Warns of a potentially dangerous situation!
▶
Failure to observe the warning may result in a serious or fatal
injury.
CAUTION!
Warns of a possible danger!
▶
Failure to observe this warning may result in a medium or minor
injury.
NOTE!
Warns of damage to property!
Important tips and recommendations.
refers to information in these operating instructions or in
other documentation.
→
designates a procedure which you must carry out.
english
Type EP 501
Summary of Contents for EP 501
Page 95: ...www ebro armaturen com...
