12
© Copyright by ebro Electronic GmbH & Co. KG
EN
Instruction manual
Change battery
1 Remove the screw under lid 1 in
order to open the battery com-
partment.
2 Remove empty batteries and put
in new batteries (2x Type AAA).
3 Close the battery compartment
and fi x the screw. Close lid 1.
1
Question
Possible cause
Possible solution
fl ashes
Batteries are empty
Change batteries
HI/LO fl ashes
Measuring range is ex-
ceeded or underrun
Only measure in the desi-
gnated measuring range
Device does not switch
on
Batteries are empty
Change batteries
Device switches Off inde-
pendently
AutoOff is active
Deactivate AutoOFF (see
section Settings)
Questions and answers
Description
Type
Penetration probe for frozen goods
TPC 210
TDC 200 with penetration probe for frozen goods,
belt holder
TDC 200 + TPC 210
Assecories
If your questions were not answered please do not hesitate to contact ebro
Electronic GmbH Co. KG.
