38
Active Track (beta version)
© 2013 EBS
9.2.3.1.3.2 Server port
It determines server port that was selected in server for collection of data from
transmitter.
9.2.3.1.3.3 Interval between subsequent connection attempts
Programmable and equipped with SIM card device will try to make automatic
connection with server. In this field you define interval (in seconds) after which next
connection will follow if the previous connection failed.
9.2.3.1.3.4 Number of connection attempts
In this filed you determine how many times device will try to make connection to
server. If connections fail, Active Track after execution of some connection will start
procedure of connection to back up server. This option is active only if we define
parameters of backup server.
9.2.3.1.3.5 Always try to connect to primary server at first
Mark this check box means, that the device will try in first order to connect to primary
server, without regard on definition of parameters for backup server (in peculiarity of
number of connection attempts).
9.2.3.1.4 Backup server parameters
Note:
This group will be inactive if device is to operate in SMS mode.
9.2.3.1.4.1 Server address
It is IP address of second (backup) receiver of monitoring system (OSM.2007) or
computer where “Communication Server” software has been installed , e.g.
89.130.125.82. This address may be provided in domain name of server, e.g.
monitor.gprs.com. In this case it is required to provide minimum one address of DNS
server.
9.2.3.1.4.2 Server port
It determines server port that was selected in server for collection of data from
transmitter.
9.2.3.1.4.3 Interval between subsequent connection...
If device can not connect to primary server defined this after exhaustion for him
number of attempts, it will begin realizing the procedure of connecting to backup
server. We in this place define space of time (in seconds), after which test will
connecting renewed if previous finished with failure.
