70
Active Track (beta version)
© 2013 EBS
GPS positioning
GPS positioning is being signalled with slow flashing of „GPS” button.
After get the valid GPS fix, during normal work of GPS, the device signals
correct operation with short flashes of “GPS” button every 5 seconds.
RFID transponder read-out
Version of Active Track with built in RFID transponders reader is able to read-out
RFID tags in two ways (like described in chapter
): single and
repeated read-out. Signaling way is following:
Read-out mode: single (RFID=0,0)
After starting of RFID transponder (see:
) device
waits for bringing near to the RFID tag. Wait time (15 seconds) is signalized by light
on "Read-out" button. Device confirms RFID read-out by double, short acoustic signal
and switching "Read-out" button light off and on. Next transmission begins.
21
64
