CPX230NWB ALARM CONTROL UNIT – USER MANUAL
15 / 42
EN
5.
REMOTE CONTROL SPECIFICATION
Frequency:
433,92MHz
Coding:
Code hopping
Number of buttons:
4
Batteries:
2 x lithium 3V type CR2016
– ARM button
– DISARM button
– SILENT ALARM button
– ALARM button
Note! The above shows the recommended settings for remote buttons. During the
control panel configuration stage, it is possible to freely assign functions to
individual buttons!
6.
USER CATEGORIES
Due to the different level of access to the functionality of the system, there are three user
categories:
1.
Administrator – the user with the highest access level. They can both arm, and disarm
the system, as well as access and make changes in all user functions presented in
chapter 9 User’s Functions and its subsections. The Admin is an A1 user and their rights
can’t be changed.
2.
Regular user – a user who can arm and disarm the system and has access to the
history of alarms and failures, the status of inputs, and can block inputs, change their
code, test inputs and outputs.
3.
Arming only – a user who can only arm the system. They do not have access to
functions that require a code. If the option “Access to history requires authorisation”
has not been enabled during the set-up, this user can enter the functions to which this
option applies (see chapter 9).
