CPX230NWB ALARM CONTROL UNIT – USER MANUAL
34 / 42
EN
Setting the name of partition,
zone, outputs, users and system
Command syntax
XXXX SETNAME=ELEMENT,
[
NR],VALUE_without_spaces
XXXX SETNAME=”ELEMENT,
[
NR],VALUE_with_spaces”
Command description
Setting the name (position VALUE) for the item (a value
items below) number nr.
XXXX – admin code
Possible values position ELEMENT:
PARTITION - Setting the name of partition; numbers 1
and 2
ZONE - Setting the name of input line unit
corresponding to the indicated number; the numbers
from 1 to 32
OUTPUT - Setting the name of output corresponding to
the indicated number; the numbers from 1 to 3
USER - Setting the name of user with the specified
number; the numbers from 1 to 32
SYSTEM - Setting the name of object which panel and
alarm system were installed. Note: here position “nr”
does not exist.
Example 1:
1234 SETNAME=PARTITION,1,Cellar
Example 2:
1234 SETNAME="PARTITION,2,Kids Room"
Feedback message
description
SETNAME:OK – command accepted
SETNAME:ERROR-PERMISSION - you do not have
permission to execute this command
SETNAME:ERROR-FORMAT - incorrect format command
SETNAME:ERROR-VALUE - incorrectly stated value
SETNAME:ERROR-PERMISSION - command rejected;
other errors
