CPX230NWB ALARM CONTROL UNIT – USER MANUAL
9 / 42
EN
2.
SLEEP Night mode arming symbol
– indicated with diodes B (partition P1)
and 2 (partition P2)
Blinks slowly: exit time countdown,
Blinks quickly: entry time countdown,
Lit continuously: partition armed in sleep mode,
Not lit: partition not armed in sleep mode.
3.
STAY Day mode arming symbol
– indicated with diodes C (partition P1)
and 3 (partition P2)
Blinks slowly: exit time countdown,
Blinks quickly: entry time countdown,
Lit continuously: partition armed in stay mode,
Not lit: partition not armed in stay mode.
4.
READY symbol
– indicated with diodes D (partition P1) and 4 (partition
P2)
Lit when all lines (without the “ignore when arming” option selected) are in nominal
condition (not triggered).
5.
Partition input or output sabotage/failure symbol
– indicated with diodes
E (partition P1) and 5 (partition P2)
Blinks quickly: no longer present, but there were failures/sabotage of inputs or outputs
assigned to the partition,
Lit continuously: there are failures/sabotage of inputs or outputs assigned to the
partition.
6.
Partition alarm/alarm memory symbol
– indicated with diodes F
(partition P1) and 6 (partition P2)
Blinks quickly: no longer present, but there were alerts from lines assigned to the
partition,
Lit continuously: there is an alarm from a line assigned to the partition.
7.
Line bypass symbol
– indicated with diodes G (partition P1) and 7
(partition P2)
Lit when at least one line belonging to the partition is locked out (bypassed) by the
user.
8.
DISARM Partition disarming symbol
– indicated with diodes H (partition
P1) and 8 (partition P2)
Lit when the given partition is disarmed, e.g. in DISARM mode.
9.
Diodes A-H (white)
