background image

GETTING STARTED 

WITH THE  

EBS RETRACER

14

USER GUIDE

HOW TO USE AND CALIBR ATE  
AN EXPRESSION PEDAL WITH RETR ACER

A. 

ACTIVATE/DEACTIVATE EXP

 

Press and hold down 

B

  and press 

A

  to enter 

Settings Menu

 
Scroll to sub menu ”Inputs” with the 

LEVEL

 control knob. 

 
Press 

B

  to enter sub menu and use 

LEVEL

 

to scroll to ”EXP”.  

Then use 

DELAY

  to change value. 

 
If your expression pedal is using external power, choose ”ACTIVE”, 
if it is not powered, choose ”PASSIVE”. Now proceed to 

B

 
The ”OFF” option deactivates the expression pedal input feature. 

B. 

CALIBRATE EXP

 

After you have choosen ACTIVE or PASSIVE, scroll down in the same 
sub menu using 

LEVEL

 to either ”AUTOCAL EXP”, “MANCAL EXP” 

or “SET EXP MID” and use 

DELAY

  to activate calibration sequence. 

 

AUTOCAL EXP 

(auto calibration) 

Move the pedal all the way back and fourth until the resolution (“res”) 
no longer increases on the screen. The maximum resolution is now 
reached. 
 
Press 

TAP/SET

 to end calibration sequence. 

 
Press 

TAP/SET

 once again to save settings and exit. 

 

MANCAL EXP

 (manual calibration) 

With MANCAL option it is possible to restrain the modulation action 
between two points of the expression pedals physical range. 
 
Move the pedal to the desired position where the action should 

start

, hit 

TAP/SET

 
Move the pedal to the desired position where the action should 

end

, hit 

TAP/SET

 
Now proceed to SET MID. 
 

A.

B.

MIDI 

3.5MM 

MINI-TELE

IN

THRU

1

4

2

5

3

Source

Gnd

Sink

AUX IN or 
LOOP RETURN

EXPRESSION or 
CV PEDAL INPUT

AUX OUT or

LOOP SEND

STEREO OUT

(in Stereo & Dual mode)

EXTERNAL TAP

FOOTSWITCH

(momentary)

MASTER 
CHANNEL IN
(mono)

MASTER

CHANNEL OUT

(mono)

IMPORTANT!
USE ONLY MONO 
PLUG FOR THIS INPUT

 

For future use.

STEREO INPUT

(in Stereo & Dual mode)

MIDI 

3.5MM 

MINI-TELE

IN

THRU

1

4

2

5

3

Source

Gnd

Sink

AUX IN or 
LOOP RETURN

EXPRESSION or 
CV PEDAL INPUT

AUX OUT or

LOOP SEND

STEREO OUT

(in Stereo & Dual mode)

EXTERNAL TAP

FOOTSWITCH

(momentary)

MASTER 
CHANNEL IN
(mono)

MASTER

CHANNEL OUT

(mono)

IMPORTANT!
USE ONLY MONO 
PLUG FOR THIS INPUT

 

For future use.

STEREO INPUT

(in Stereo & Dual mode)

Summary of Contents for RETRACER DELAY



















Reviews: