GETTING STARTED
WITH THE
EBS RETRACER
16
USER GUIDE
D.
DEACTIVATE EXP PARAMETER
(S)
If your intensions are to remove
ALL
parameters, proceed to
E
. If
you want to change SOME parameters, follow the steps below.
1. Put the chosen parameters knob to zero (all way to the left).
2. Hold
TAP
and press
ACTIVE
to enter ”exp record mode”.
3. Put the same knob to the middle (12 o´clock) and then back to
zero.
4. Again, Hold
TAP
and press
ACTIVE
to escape from “exp record
mode”.
E.
RESET EXP
Hold
TAP
and hold
ACTIVE
for about 1 second.
A prompt will appear. Use
A
to select ”YES” option, and press
SET
once to confirm and exit prompt.
All the expression parameters are now reset and expression pedal is
deactivated for the
active
program.
F.
TIPS & TRICKS
If you forgot to add a parameter, don’t worry, just enter ”exp
record mode” again and do the add-ons, the already saved exp
parameters wont change (as long as you don’t modify them). Don’t
forget to exit ”exp record mode” when done.
To modify the starting position (heel down) of an expression
parameter, just modify the parameter to the desired value.
When calibrating the expression pedal using AUTOCAL EXP, the mid
position will be set automatically (in the middle).
D.
E.
MIDI
3.5MM
MINI-TELE
IN
THRU
1
4
2
5
3
Source
Gnd
Sink
AUX IN or
LOOP RETURN
EXPRESSION or
CV PEDAL INPUT
AUX OUT or
LOOP SEND
STEREO OUT
(in Stereo & Dual mode)
EXTERNAL TAP
FOOTSWITCH
(momentary)
MASTER
CHANNEL IN
(mono)
MASTER
CHANNEL OUT
(mono)
IMPORTANT!
USE ONLY MONO
PLUG FOR THIS INPUT
For future use.
STEREO INPUT
(in Stereo & Dual mode)
MIDI
3.5MM
MINI-TELE
IN
THRU
1
4
2
5
3
Source
Gnd
Sink
AUX IN or
LOOP RETURN
EXPRESSION or
CV PEDAL INPUT
AUX OUT or
LOOP SEND
STEREO OUT
(in Stereo & Dual mode)
EXTERNAL TAP
FOOTSWITCH
(momentary)
MASTER
CHANNEL IN
(mono)
MASTER
CHANNEL OUT
(mono)
IMPORTANT!
USE ONLY MONO
PLUG FOR THIS INPUT
For future use.
STEREO INPUT
(in Stereo & Dual mode)
