background image

Chengdu Ebyte Electronic Technology Co,;Ltd                                                                                                                            E 90-DTU (230N33) user manual

 

Copyright ©2012–2019

Chengdu Ebyte Electronic Technology Co,;Ltd    

                                                                                                                       

  13

 

 

2.If there’s no complicated programming, opening th

E90-DTU

数传电台配置软件

  (E90-DTU para meter configuration 

application) to modify  parameters. 

7.2.

 

Parameter  setting  instruction 

 

Parameter 

Description   

Baud rate 

The serial port baud rate of a wireless data station at work

1200bps

115200bps

 

Odd-even check 

Support 8N1:no check 

8E1:even-check

8O1:odd-check

  Both are 8-bit data bits and 1-bit stop bits. 

Air data rate

bps

 

Wireless communication  rate, also known as air baud rate air rate high,  data transmission speed, 

transmission of the same data time delay is small, but the transmission distance will become shorter. 

Transmitting power 

In order to ensure the working efficiency, it is recommended  to use the maximum  power. If the 

transmitted power is reduced, the communication distance will become  shorter and the required current 

will be reduced 

FEC 

The lost or interfered data can be partially corrected by complex  encoding,  which can improve the 

equivalent receiving  sensitivity by about 3dBm. Turning off this function can reduce the communication 

delay. 

Transmission mode 

Fixed length transmission: automatic subcontracting in traditional wireless transmission mode, with a 

maximum  of 77 bytes per packet. 

Continuous transmission: unlimited packet length, supporting wireless continuous transmission. 

Wake Up Time 

There is no direct relationship with the communication  delay. If the customer needs low-power 

applications, this option shall be adjusted as required. In the power-saving mode, the longer  the wake-up 

time, the lower the power consumption of the receiving  end, and the greater the communication delay. 

Station Address 

Internal address of wireless data station, stations with the same address as those independent of M odbus 

address can communicate with each other. This feature can be used to realize software filtering grouping 

input range :0~65535, decimal  number. 

Summary of Contents for 230N33



















Reviews: