Chengdu Ebyte Electronic Technology Co.,Ltd.
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
3
The shutdown current is often much smaller than the current consumed by the power supply part of the whole
machine at no load, so it is not necessary to be excessively demanding;
Because the material itself has a certain error, a single LRC component has an error of ±0.1%, but hesitate to use
multiple LRC components in the entire RF loop, there will be a situation of error accumulation, resulting in a difference
between the transmit current and the receive current of different modules;
Reducing the transmission power can reduce power consumption to a certain extent, but for many reasons, reducing
the transmission power transmission will reduce the efficiency of the internal PA.
3. Mechanical Dimensions and Pin Definition
3.1 E78-868LN22S(6601) dimension drawing
