Chengdu Ebyte Electronic Technology Co., Ltd.
E01-ML01DP4 User Manual
Copyright ©2012–2018
，
Chengdu Ebyte Electronic Technology Co.,Ltd
7
The ground will absorb and reflect wireless radio wave, so the performance will be poor when testing near ground.
Sea water has great ability in absorbing wireless radio wave, so performance will be poor when testing near the sea.
The signal will be affected when the antenna is near metal object or put in a metal case.
Power register was set incorrectly, air data rate is set as too high (the higher the air data rate, the shorter the
distance).
The power supply low voltage under room temperature is lower than 2.5V, the lower the voltage, the lower the
transmitting power.
Due to antenna quality or poor matching between antenna and module.
6.2 Module is easy to damage
Please check the power supply source, ensure it is 2.0V~3.6V, voltage higher than 3.6V will damage the module.
Please check the stability of power source, the voltage cannot fluctuate too much.
Please make sure antistatic measure are taken when installing and using, high frequency devices have electrostatic
susceptibility.
Please ensure the humidity is within limited range, some parts are sensitive to humidity.
Please avoid using modules under too high or too low temperature.
6.3 BER(Bit Error Rate) is high
There are co-channel signal interference nearby, please be away from interference sources or modify frequency and
channel to avoid interference;
Poor power supply may cause messy code. Make sure that the power supply is reliable.
The extension line and feeder quality are poor or too long, so the bit error rate is high;
7. Production guidance
This module is a DIP module, the workers must work according to the static discharge operation specifications
while welding. This module is a static-sensitive product, it may cause permanent damages if the module is not welded
according to the specifications.
8. E01 Series
Model No.
IC
Frequency
Tx power
Test
distance
Package
Antenna
Hz
dBm
km
nRF24L01P
2.4G
0
0.1
SMD
PCB
nRF24L01P
2.4G
0
0.1
DIP
PCB
nRF24L01P
2.4G
0
0.2
SMD
IPEX
