Chengdu Ebyte Electronic Technology Co., Ltd.
E01-ML01DP4 User Manual
Copyright ©2012–2018
，
Chengdu Ebyte Electronic Technology Co.,Ltd
2
1. Overview
1.1 Brief introduction
E01-ML01DP4 is a DIP module based on original
imported nRF24L01P form Nordic in Norway, operates at
2.4Ghz with PCB antenna.
The RF performance of E01-ML01DP4 and components
selection during R&D are all in accordance with industrial
grade standards, using industrial-grade high-precision 16MHz
crystal oscillator, also it obtained FCC, CE and RoHS
certification. A power amplifier (PA) and a low noise amplifier
(LNA) are built in, so that the maximum transmit power
reaches 100mW and the receiving sensitivity is further
improved. The products have been greatly improved when there is no PA and LNA in design.
The user needs to use the MCU driver or use a dedicated SPI debugging tool to develop E01-ML01DP4.
1.2 Features
Communication distance tested is up to 1.8KM
；
Maximum transmission power of 100mW, software multi-level adjustable;
Support air date rate of 2Mbps, 1Mbps, 250kbps;
125 communication channels to meet the needs of multi-point communication, grouping, frequency hopping, etc.
Connect to the MCU through the SPI interface at a rate of 0 to 10 Mbps.
Support 2.0V~3.6V power supply, power supply over 3.3V can guarantee the best performance
；
Industrial grade standard design, support -40 ~ 85 °C for working over a long time
；
PCB antenna;
Enhanced ShockBurst, fully compatible with NORDIC all nRF24L, nRF24E, nRF24U series.
1.3 Application
Wearable device
；
Smart home and industrial sensors
；
Security system, positioning system
；
Wireless remote control, drone
；
Wireless game remote control
；
Healthcare products
；
Wireless voice, wireless headset
；
Automotive industry applications.
