nRF24L01P wireless module
E01 series user manual
Copyright ©2012–2017,Chengdu Ebyte Electronic Technology Co.,Ltd.
14
3. Recommended Circuit Diagram
No.
Brief introduction of connection between module and MCU (STM8)
1
CE pin can be high level for long-term, but it needs to set as POWER DOWN mode when the module writes registers, and it is
recommended that CE is controlled by MCU pin.
2
As interrupt pin for IRQ, it can be used to wake-up MCU and achieve fast response;
But the user can get the interrupt status through SPI (not recommended, it is not conducive to the overall power consumption, and with
low efficiency).
4. Electrical Parameters
In different power of nRF24L01P, the real transmitting power of E01-2G4M27D, 3.3V, as below: