Chengdu Ebyte Electronic Technology Co., Ltd.
E104-BT06 User Manual
Copyright ©2012–2018
，
Chengdu Ebyte Electronic Technology Co., Ltd
0x03
0x03
FFF0
N
0x09
Configurable, maximum 22 bytes
e.g
：
0303FFF0<len>09< Device name >
Note: This data does not require user configuration.
iBeacon broadcast information
Instructions to configure UUID, Major, and Minor respectively
Command AT+ADV=2 to configure to work in iBeacon broadcast mode, broadcast immediately
Bluetooth connection is not supported in iBeacon broadcast mode
Advertising
iBeacon Prefix
UUID
Major
Minor
Tx-Power
9B
16B
2B
2B
1B
E.g
：
0201061AFF4C000215FDAFDA50693A4E24FB1AFCFC6EB076478252775848F00
5.4 Configuration
The module supports two configuration methods: serial port configuration, air configuration (FFF3 characteristic
value). The two configuration methods are basically the same. Before the air configuration, the authentication
password of AT+AUTH=123456 must be passed. After the authentication is passed, the module is allowed to use
the air configuration. The air configuration authentication cycle is this connection, and re-authentication is required
if the device is disconnected and reconnected.
5.5 Data indication
When the module outputs data through the serial port, the module sets the DATA pin to a high level, indicating that
data is being sent. AT command response does not change the DATA pin state.
