Chengdu Ebyte Electronic Technology Co., Ltd.
Copyright ©2012–2018, Chengdu Ebyte Electronic Technology Co.,Ltd.
6
capacitor)
11
GND
Ground wire, connected to the power reference ground
12
GND
Ground wire, connected to the power reference ground
13
DIO1
Input/Output
Configurable universal IO port (see SX1262 manual for details)
14
BUSY
Output
For status indication (see SX1262 manual for details)
15
NRST
Input
Chip reset trigger input pin, valid in low level
16
MISO
Output
SPI data output pin
17
MOSI
Input
SPI data output pin
18
SCK
Input
SPI data output pin
19
NSS
Input
Module chip select pin for starting an SPI communication
20
GND
Ground wire, connected to the power reference ground
21
ANT
Antenna interface, stamp hole (50 ohm characteristic impedance)
22
GND
Ground wire, connected to the power reference ground
4. Basic Operation
4.1 Hardware Design
