Chengdu Ebyte Electronic Technology Co.,Ltd.
Copyright ©2012–2020
Chengdu Ebyte Electronic Technology Co.,Ltd.
32
parameters through instructions or host computer software, and please visit www.ebyte.com download for supporting
host computer software.
Chapter 9 Secondary Development
The module supports secondary development, CC1310 RF chip, users can carry
out secondary development
according to the product pin description
required in
Chapter 3
of this article;
Ebaite can customize function development for customers, please contact the sales hotline
4000-330-990
.
9.1 Program Burning
keywords
Precautions
Programming
procedures
The module is an SoC module, with its own GPIO port, and the program downloads using a CC series
dedicated
downloader
: JTAG downloader (or TI official CC1310 supporting development board), can not
use serial port or any other ISP, ICP tools.
The figure below shows a JTAG connection diagram
(
XDS100),
and the
specific development method is
detailed in
the
relevant documents of Ti (where the TDI and TDO pins can not be connected).
。
Chapter 10 Hardware Design
It is recommended to use a DC regulated power supply to supply the module, the power supply ripple coefficient is as
small as possible, and the module needs to be reliably grounded;
