Chengdu Ebyte Electronic Technology Co.,Ltd.
Copyright ©2012–2020
Chengdu Ebyte Electronic Technology Co.,Ltd.
35
Heating slope (T
L
~T
p
).
3°C/sec, maximum
3°C/sec, maximum
Liquid phase temperature (T
L
).
183℃
217℃
Hold time above
TL
60~90 seconds
60~90 seconds
The peak temperature of the package body is T
p
The user must not exceed the
temperature indicated on the
product's
"Moisture
Sensitivity" label.
The user must not exceed the
temperature indicated on the
product's
"Moisture
Sensitivity" label.
The time (Tp) within 5°C of the specified grading
temperature (Tc) is shown in the figure below
20 seconds
30 seconds
Cooling slope (T p~T
L
).
6 °C/sec, max
6 °C/sec, max
Time from room temperature to peak
temperature
6 minutes, the longest
8 minutes, the longest
※The peak temperature (Tp) tolerance definition of the temperature curve is the upper limit for the user
12.2 Reflow soldering curve
