Chengdu Ebyte Electronic Technology Co.,Ltd
Copyright ©2012–2019
，
Chengdu Ebyte Electronic Technology Co.,Ltd
10
29
NC
Reserved pin
Reserved, to be floated
30
NC
Reserved pin
Reserved, to be floated
31
NC
Reserved pin
Reserved, to be floated
32
RESET
Input
Module reset pin
33
NC
Reserved pin
Reserved, to be floated
34
NC
Reserved pin
Reserved, to be floated
35
LINK
Output
To indicate module ’ s current network connection status.
Can be configured as open-drain output or push-pull output, see parameter settings
for details.
A 1K protection resistor needs to be connected in series when using.
(it can be suspended)
36
NC
Reserved pin
Reserved, to be floated
37
NC
Reserved pin
Reserved, to be floated
38
NC
Reserved pin
Reserved, to be floated
39
NC
Reserved pin
Reserved, to be floated
40
NC
Reserved pin
Reserved, to be floated
41
GND
Ground
Ground electrode
42
GND
Ground
Ground electrode
E70 (915NW14S) series can achieve pin compatibility, Pin to Pin replacement.
5. Firmware transmitting mode
5.1 Transparent transmission
Format
Values
When the coordinator is set to transparent transmission, the coordinator will send broadcast message. At this time, all non-dormant
nodes in the entire network will receive data.
5.2 Short address transmission
Format
Values
Coordinator short address transmission format: short a valid data 00 00 or FF FF are broadcast address
Coordinator
HEX
Sending
：
00 01 AA BB CC
Node A address 00 01
HEX
Receiving
：
AA BB CC
Node B address 00 02
HEX
Null
Node C address 00 03
HEX
Null
Summary of Contents for E70-915NW14S
Page 1: ...E70 915NW14S User Manual...
